Thetford: 01842 755711

Daventry: 01327 262610
Andover: 01264 358525

Laser Cutting

Fast and cost effective Laser cutting service for complex shapes on thinner gauge metals.

Pegasus Profiles Laser cutting services are used to produce complex, high quality shapes on thinner gauge metals. Large batch runs of components at highly competitive prices are possible with these fast and extraordinarily accurate machines.

Cutting plates up to 3000mm x 1500mm with a very small heat effected zone.

The cutting specification:
  • Mild steel – 0.5mm up to 20mm
  • Stainless steel – 0.5mm up to 12mm
  • Aluminium – 0.5mm up to 8mm
  • Laser marking and etching of parts
  • CE Marking compliant

There are several useful features which can be incorporated to the design of your laser cut components, including tab and slot features and marking and etching. By using these features the speed of assembly and fabrication will be improved, saving you both time and money. Pegasus Profiles Laser is also able to laser etch the surface of the metal to allow easy identification of parts or, as an alignment aid during assembly.

Pegasus Profiles are fully CE Marking compliant. Our commitment to service and quality means that we operate all cutting services to the ISO 9001:2008 audited quality system and have been able to offer profiles that are CE compliant since 2014.

We are accredited with a Factory Production Control (FPR) certificate, ensuring we conform to the BS EN 1090-1:2009/A1:2011 standard for the thermal cutting/profiling of steel and aluminium components. By conforming to this EU standard, we are now able to provide CE ready laser cut parts for steel structures up to Execution Class-3.

Watch the installation of our new laser profiling machine. Three days distilled into 39 seconds.

Material Grades

Click On material type to view available grades.
Full mill certificates can be supplied on request.

  • Structural Steel

    BS EN 10025 Grade S275JR
    BS EN 10025 Grade S355J0
    BS EN 10025 Grade S355J2

    Anti-Slip floor plate
    Durabar ® / Chequer Plate

  • Boiler Plate Grade

    BS 1501-161-430b / ASTM-A516 GR60 & GR70
    BS 1501-224-490B-LT50 / EN10028-P355-NL1

  • High Strength Steels Grades

    8mm upwards Weldox ® 700

    3mm-6mm Domex ® 650, 700

  • Engineering Grades

    BS 970 080A40 (EN8 Plate)

  • Wear Resistant Steels

    Hardox ® 400, 450, 500

  • Stainless Steels

    EN 10088-1 – 1.4306 / ASTM 240 – 304L
    EN 10088-1 – 1.4404 / ASTM 240 – 316L
    EN 10088-2 – 1.4003 / 3CR12®

  • Aluminium

    1050, 5083, 6082